LIVRAISON GRATUITE DÈS 150 € D'ACHAT
Passer au contenu

RAM Mounts Cradles RAM-HOL-ZE25PDHU

Support ajusté RAM Mounts (verrou) pour Zebra ET60/65

Ref: RAM-HOL-ZE25PDHU
Series: RAM Mounts Cradles
Épuisé
€308,12
TTC €372,83
Unités en arrivage, disponibles à l'achat
Support sur site d'un an

M'avertir lorsque de retour en stock

Request a quote for volumn pricing

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 12VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information:?Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHU holder is supplied.
Discuter avec un expert
Bénéficiez du support de nos experts en imprimantes de codes-barres ! Une assistance rapide et fiable pour la configuration, les consommables et toutes vos questions Besoin d’aide?

Modes de paiement

  • Visa
  • Mastercard
  • PayPal
  • Amex
  • Bizum

Modes d'expédition

  • UPS
  • InPost
  • FedEx
  • DHL
  • Schenker
  • Kuehne Nagel
  • Raben
  • MRW
  • Tipsa

Description
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 12VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information:?Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHU holder is supplied.

Spécifications détaillées

Informations techniques RAM MOUNTS CRADLES RAM-HOL-ZE25PDHU

  • Fabricant RAM Mount
  • Série d'imprimantes RAM Mounts Cradles
  • Option message cadeau disponible No
  • Garantie 36 mois

Expédition
Shipping

Expéditions sûres et sécurisées

Nous travaillons avec des transporteurs tels que : DHL, UPS, Correo Express et TXT.

La livraison est gratuite pour les commandes de plus de 150 € dans les pays de l'Union européenne et s'effectue sous 2 à 3 jours ouvrables (hors îles Canaries, Ceuta et Melilla).

Modes d'expédition

  • Livraison en 24h
  • Livraison standard
  • Livraison gratuite
  • Retrait gratuit en magasin
Voir les options de livraison

Maintenance

Notre entreprise propose différents types de maintenance. Vous pouvez demander un contrat de maintenance auprès de Barcode Site adapté à vos besoins, selon les équipements ou la période que vous jugez nécessaire.

Pour plus d'informations, envoyez un e-mail à info@barcodesite.com

Accessoires

Accessoires compatibles pour RAM Mounts Cradles

Modèles de la série

Autres produits de la série RAM Mounts Cradles

  8. Économisez Liquid error (snippets/product-badge line 32): Computation results in '-Infinity' %

    RAM Mounts Cradles RAM-GDS-DOCK-D2CM-NDU-GRY

    Station d’accueil de bureau RAM Mounts GDS avec Power Delivery pour smartphones et tablettes - dans une coque de protection IntelliSkin Next Gen - prise en charge de DeX (Next Gen) - connecteur USB-C - gris

    Rupture de stock

    RAM-GDS-DOCK-D2CM-NDU-GRY

    €133,30
    TTC €161,29
    €133,30
    TTC €161,29
Discuter avec un expert

Modes de paiement

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner

Modes d'expédition

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner