LIVRAISON GRATUITE DÈS 150 € D'ACHAT
Passer au contenu
RAM Mounts Cradles RAM-HOL-ZE25PLU

RAM Mounts Cradles RAM-HOL-ZE25PLU

Support sur mesure RAM Mounts (à verrouillage par clé) pour Zebra ET60/65

Ref: RAM-HOL-ZE25PLU
Series: RAM Mounts Cradles
Économisez Liquid error (snippets/product-badge line 32): Computation results in '-Infinity' %
€264,97
TTC €320,61
En stock, expédition sous 2-3 jours
Support sur site d'un an

M'avertir lorsque de retour en stock

Request a quote for volumn pricing

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 12VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information:?Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PLU holder is supplied.
Discuter avec un expert
Bénéficiez du support de nos experts en imprimantes de codes-barres ! Une assistance rapide et fiable pour la configuration, les consommables et toutes vos questions Besoin d’aide?

Modes de paiement

  • Visa
  • Mastercard
  • PayPal
  • Amex
  • Bizum

Modes d'expédition

  • UPS
  • InPost
  • FedEx
  • DHL
  • Schenker
  • Kuehne Nagel
  • Raben
  • MRW
  • Tipsa

Description
This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 12VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information:?Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PLU holder is supplied.

Spécifications détaillées

Informations techniques RAM MOUNTS CRADLES RAM-HOL-ZE25PLU

  • Fabricant RAM Mount
  • Série de terminaux RAM Mounts Cradles
  • Modèles compatibles Zebra ET60/ET65
  • Option message cadeau disponible No
  • Garantie 36 mois

Expédition
Shipping

Expéditions sûres et sécurisées

Nous travaillons avec des transporteurs tels que : DHL, UPS, Correo Express et TXT.

La livraison est gratuite pour les commandes de plus de 150 € dans les pays de l'Union européenne et s'effectue sous 2 à 3 jours ouvrables (hors îles Canaries, Ceuta et Melilla).

Modes d'expédition

  • Livraison en 24h
  • Livraison standard
  • Livraison gratuite
  • Retrait gratuit en magasin
Voir les options de livraison

Maintenance

Notre entreprise propose différents types de maintenance. Vous pouvez demander un contrat de maintenance auprès de Barcode Site adapté à vos besoins, selon les équipements ou la période que vous jugez nécessaire.

Pour plus d'informations, envoyez un e-mail à info@barcodesite.com

Discuter avec un expert

Modes de paiement

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner

Modes d'expédition

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner