ENVÍO GRATIS EN PEDIDOS SUPERIORES A 150€
Ir a contenido
RAM Mounts Cradles RAM-HOL-ZE22PD2U

RAM Mounts Cradles RAM-HOL-ZE22PD2U

Soporte a medida RAM Mounts (con pestillo) para Zebra ET80/85

SKU: RAM-HOL-ZE22PD2U
Series: RAM Mounts Cradles
Agotado
€225,34
con IVA €272,66
Unidades entrantes, disponible para vender
1-Año de Soporte In Situ

Notificarme cuando vuelva a estar disponible

Request a quote for volumn pricing

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PD2U:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp- Right or NFC-RepeaterInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22PD2U holder is supplied.
Chatear con un experto
¡Recibe soporte de nuestros expertos en impresoras de códigos de barras! Asistencia rápida y fiable para la configuración, los consumibles y cualquier duda que puedas tener Recibir ayuda

Métodos de pago

  • Visa
  • Mastercard
  • PayPal
  • Amex
  • Bizum

Métodos de envío

  • UPS
  • InPost
  • FedEx
  • DHL
  • Schenker
  • Kuehne Nagel
  • Raben
  • MRW
  • Tipsa

Descripción
This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PD2U:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp- Right or NFC-RepeaterInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22PD2U holder is supplied.

Ficha técnica

Ficha técnica RAM MOUNTS CRADLES RAM-HOL-ZE22PD2U

  • Fabricante RAM Mount
  • Serie RAM Mounts Cradles
  • Modelos compatibles Zebra ET80/ET85
  • Mensaje regalo disponible No
  • Garantía 36 meses

Envíos
Shipping

Envíos totalmente seguros

Las empresas de transporte con las que trabajamos son: DHL, UPS, Correo Express y TXT.

Los pedidos superiores a 150€ son gratuitos en países de la Unión Europea y se entregarán en un plazo de 2-3 días laborables (Canarias, Ceuta y Melilla excluidos).

Tipos de envíos

  • Envíos 24h
  • Envío estándar
  • Envío Gratis
  • Recogida en tienda Gratis
Saber más sobre los envíos

Mantenimiento

Nuestra empresa ofrece diferentes tipos de mantenimientos, puedes solicitar un contrato de mantenimiento con Barcode Site que se ajuste a tus necesidades, ya que sea dependiendo del equipo o del periodo que consideres necesario.

Para más información envía un correo a info@barcodesite.com

Chatear con un experto

Métodos de pago

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner

Métodos de envío

  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner
  • Banner